Our Discussion Forums and Online Classifieds may be viewed by anyone, but posting new questions or responding to existing messages is limited to VBA members.

userplus  This icon on any site menu indicates a page or service that is for VBA members.

  Friday, 07 January 2022
  0 Replies
  60 Visits
  Subscribe
I have thought about doing the oxalic acid drench treatment for a while, but one thing I had wondered about was using a syringe to squirt on the drench as that seemed like a very "fiddly" process to me. So when I was at Premier1 buying a new fence charger and saw a discounted auto syringe/drencher (something I know from growing up on a sheep farm) I decided to buy it. It sat on the shelf for a few years till this Fall when I got my act together to actually get the bees drenched before the snow flew. I followed betterbee's OA drench directions ( https://www.betterbee.com/instructions-and-resources/how-to-do-an-oxalic-acid-dribble-treatment.asp ) to make the OA solution and for guidance on how much to apply per seam. I then loaded the solution into a bottle, connected the feed tube to the bottle. The auto inoculator feeding tube went into the bottle and when in the bee yard I could use the inoculator to squirt on set-volumes (5 ml in this case) of solution per seam easily, reliably, and with just one hand (if I could get the bottle snugly positioned before hand). While possibly not worth the investment of $40 for a beekeeper with just a few hives, a beekeeper with a dozen hives might like having a slick way to apply the OA drench quickly and efficiently to their hives.

Here is a link to the Premier1 auto inoculator I used. Its a 12.5ml model (it can dose up to 12.5ml), they also have a 6ml model which would also work. I might go back sometime and order the backpack just to make the process even easier.
https://www.premier1supplies.com/p/auto-syringe-drencher-12-5-ml?cat_id=8

Other places offer auto inoculators that would work just as well. Also, I bought a small section of flexible plastic tubing to use as the applicator, I got a size that slid right into the end and it would fine. I figured the flexible tubing could get into a seam if I had to.
There are no replies made for this post yet.
Be one of the first to reply to this post!